SMOKE EVACUATORS CS SERIES

The smoke evacuators CSU are innovative suction units, with new characteristics, which have been designed to evacuate and filter the smoke produced during all the electro-surgical procedures, by eliminating the bad smells or the bacteriological risks, and by solving the very common problem of the visual field during the laparoscopic procedures. The CSU200 is equipped with an electric suction group at high flow and medium noise, moreover it has got the function TURBO - high suction. It represents the basic model, which is ideal for the out-patient treatment, thanks to the connection with the speculum in gynaecology, the suction systems on the electrodes-handle, and the fixed tubing on the operation point. The CSU900LC - the most complete model - is equipped with an electric suction group at high flow and low noise, a special circuit for the connection to a centralized vacuum system, and another circuit for the controlled output of the CO2 which is used in the laparoscopic procedures with the pneumoperitoneum. It is the ideal model for the usage in the operating theatre, thanks to the low level of noise produced, and the big range of the available procedures. It allows what follows: - the evacuation of the smoke during the surgical open sky procedures, thanks to the aspiration system on the electrodes-handle or by an independent cannulae, trough the suction group or the external vacuum system; - the adjustable evacuation of the smoke during the laparoscopic procedures with the CO2pneumoperitoneum, thanks to the connection with the trocar, through the controlled output of the gas itself; - the adjustable evacuation of the smoke during the gas-less laparoscopic procedures, thanks to the connection with the trocar, through the suction group or the external vacuum system. The CSU200LC is the same as the previous one, but it is equipped with a less powerful electric suction group. It is ideal for the suction during the laparoscopic procedures. It allows what follows: - the evacuation of the smoke during the laparoscopic procedures with the CO2 pneumoperitoneum, through the adjustable leakage of the gas itself; - the evacuation of the smoke, with adjustable flow, during the gas-less laparoscopic procedures, through the suction group or the external vacuum system. All the models can be used as a “shelf” for the electro surgical units; there are also specific trolleys, both for the out-patient treatment and the operating theatre.

TECHNICAL FEATURES

GENERAL TECHNICAL FEATURES

Microprocessor Control System - Functioning control through micro-processor, with auto-check at the switching-on Three Stages Filter - Three stages filter: two antibacterial Hepa type, with a total efficiency 99,99999% for Æ 0. 3 micron particles, and one anti-smell with active carbons, controlled by a micro-processor with double check (filter efficacy, limit time of usage of 2 hours), luminous alarm signal and functioning block after the first switching-on before the intervention of the control circuit Automatic Start/Stop Sensing System - Automatic switching on / switching off of the suction system, every time the electro surgical unit is activated, through a non-contact sensing system which eliminates the need of both specific connections to the electro surgical unit and a pedal switch (available just in case the operator prefers this option) Programmable Stop Delay - Adjusting of the delay in the switching off of the suction system from 0 to 30sec, in order to completely eliminate the smoke Switching on Pedal - Pneumatic, waterproof, anti-explosion, for operating theatre IPX7/AP/APG (non standard, but available on request) Enclosure - Metallic and painted, it can be used as a “shelf” for the electro surgical unit, or it can be put in specific trolleys Cooling – By convection, no fan Classification IEC 60601-1 - Class I, type BF (leakage to the enclosure: less than 25microA; leakage to the patient: absent) Safety Rules - The units meet IEC 601-1 Safety Rules Classification and Approval EC 93/42 - Class IIA - CE0051 Dimensions and Weight  - 40x40x21cm, 17kg

TECHNICAL FEATURES CS200

Suction Group - Rotative, non lubricated - Flow: 500lt/min; Max. vacuum: 110mmHg Suction Regulation -Electronic, with function Turbo - high suction Rotative control with visual bar-led Mains / Absorption / Fuses / Switch  - 230V-50/60Hz / 650VA / 2x5A / Bipolar, green.

TECHNICAL FEATURES CS900LC

Suction Group - Rotative, lubricated - Flow:50lt/min; Max. vacuum: 720/730mmHg Suction Regulation -  Rotative control, with graduated scale Mains / Absorption / Fuses / Switch  - 230V-50/60Hz / 250VA / 2x1,6A / Bipolar, green Connection to the external vacuum system - Connector with rapid device Control of the CO2 output  - Circuit with pressure tight electro-valve.

TECHNICAL FEATURES CS200LC

Suction Group - Rotative, with membrane / piston - Flow: 23lt/min; Max. vacuum: 650/700mmHg Suction Regulation - Rotative control, with graduated scale Mains / Absorption / Fuses / Switch - 230V-50/60Hz / 138VA / 2x1A / Bipolar, green Connection to the external vacuum system - Connector with rapid device Control of the CO2  output - Circuit with pressure tight electro-valve.